Difference between revisions of "Textile mechanics"

From TexGen
Jump to navigationJump to search
 
(14 intermediate revisions by 2 users not shown)
Line 1: Line 1:
[[Image:Satincompression.png|thumb|Figure 1. Chomarat 800S4-F1 satin weave fabric meshed with TexGen compressed with in-house FE solver]]
+
TexGen has been used to create the geometry of fabrics for meso-scale textile mechanics modelling. Meshing can either be done directly within TexGen or geometry can be exported to the two most common CAD exchange file formats, IGES and STEP. Alternatively Python scripts can be used to transfer geometry to specific third party applications such as ABAQUS.
[[Image:Thickness_comp_graph.png|thumb|Figure 2. Effect of fabric thickness on a plain weave unit cell compression ]]
 
  
TexGen has been used to create the geometry of fabrics for meso-scale textile mechanics modelling. Meshing can either be done directly within TexGen or geometry can be exported to the two most common CAD exchange file formats, IGES and STEP. Alternatively Python scripts can be used to transfer geometry to specific third party applications such as ABAQUS.
+
Mechanical models of commercial fabrics have been created in which textiles were meshed and then exported to the ABAQUS finite element analysis (FEA) package.  Deformations were predicted for fabric unit cells in tension, compression, shear and bending, utilising their measured equivalents for individual yarns as input data. Fig 1 shows a modelled deformed twill weave unit cell in tension, compression, shear and bending. Validations of the FE predictions for the mechanical properties against experimental data are shown in Fig 2.
  
The in-house finite element analysis software features periodic boundary conditions as well as a periodic contact algorithm eliminating the need for elements to be contained within a set unit cell (This is illustrated in the Figure 1). Compressional deformations are applied by parallel planes above and below the fabric. Tensile, shear and bending deformations are applied by adjusting the repeat vectors. Using this approach, strains can easily be applied in a consistent manner without overconstraining the model<ref>M. Sherburn, "Geometric and Mechanical Modelling of Textiles", Thesis in preparation, 2007, Nottingham, UK.</ref>.
+
<gallery caption="Figure 1. Deformed twill weave unit cell" >
 +
File:c5tension.png|Tension
 +
File:c5compression.png|Compression
 +
File:c5shear.png|Shear
 +
File:c5bending.png|Bending
 +
</gallery>
  
Work using the commercial finite element software package ABAQUS has also been carried out investigating the effect of fabric architectures on fabric mechanical properties. Figure 2 shows the effect of yarn crimp height on a unit cell compression behaviour<ref>H. Lin, M. Sherburn, A. C. Long and M. J. Clifford, "Integrated Multi-Scale Modelling for Garment Design", Proceedings of the 85th Textile Institute World Conference, 1-3rd March 2007, Sri Lanka, Colombo.</ref>.
+
<gallery caption="Figure 2. Experimental data versus FE predictions" >
 +
File:Bending Graph.png|Tension
 +
File:Compression Graph.png|Compression
 +
File:Shear Graph.png|Shear
 +
File:Bending Graph.png|Bending
 +
</gallery>
  
 
==References==
 
==References==
  
<references/>
+
1. Hua Lin, Louise P Brown and Andrew C Long, "Modelling and Simulating Textile Structures using TexGen", Advanced Materials Research Vol. 331 (2011) pp 44-47
 +
 
 +
2. H. Lin, X. Zeng, M. Sherburn, A. C. Long and M. J. Clifford. "Automated geometric modelling of textile structures", Textile Research Journal, v82, n16, 2012, pp. 1689-1702.
 +
 +
3. H Lin, M J Clifford, A C Long, M Sherburn. “Finite element modelling of fabric shear”, Modelling and Simulation in Materials Science and Engineering, Vol.17, n1, 2009.
 +
 
 +
4. H. Lin, A.C. Long, M. Sherburn, M. J. Clifford, "Modelling of mechanical behaviour for woven fabrics under combined loading", International Journal of material forming, Spring/ESAFORM 2008.
 +
 
 +
5. H Lin, M Sherburn, J Crookston, A C Long, M J Clifford, I A Jones. “Finite element modelling of fabric compression”, Modelling and Simulation in Materials Science and Engineering, Vol.16, n3, 2008.

Latest revision as of 14:07, 6 February 2018

TexGen has been used to create the geometry of fabrics for meso-scale textile mechanics modelling. Meshing can either be done directly within TexGen or geometry can be exported to the two most common CAD exchange file formats, IGES and STEP. Alternatively Python scripts can be used to transfer geometry to specific third party applications such as ABAQUS.

Mechanical models of commercial fabrics have been created in which textiles were meshed and then exported to the ABAQUS finite element analysis (FEA) package. Deformations were predicted for fabric unit cells in tension, compression, shear and bending, utilising their measured equivalents for individual yarns as input data. Fig 1 shows a modelled deformed twill weave unit cell in tension, compression, shear and bending. Validations of the FE predictions for the mechanical properties against experimental data are shown in Fig 2.

References

1. Hua Lin, Louise P Brown and Andrew C Long, "Modelling and Simulating Textile Structures using TexGen", Advanced Materials Research Vol. 331 (2011) pp 44-47

2. H. Lin, X. Zeng, M. Sherburn, A. C. Long and M. J. Clifford. "Automated geometric modelling of textile structures", Textile Research Journal, v82, n16, 2012, pp. 1689-1702.

3. H Lin, M J Clifford, A C Long, M Sherburn. “Finite element modelling of fabric shear”, Modelling and Simulation in Materials Science and Engineering, Vol.17, n1, 2009.

4. H. Lin, A.C. Long, M. Sherburn, M. J. Clifford, "Modelling of mechanical behaviour for woven fabrics under combined loading", International Journal of material forming, Spring/ESAFORM 2008.

5. H Lin, M Sherburn, J Crookston, A C Long, M J Clifford, I A Jones. “Finite element modelling of fabric compression”, Modelling and Simulation in Materials Science and Engineering, Vol.16, n3, 2008.