Hi Louise,
I have tried another options of meshing in TexGen and I ran them. I found several warnings in my data file.
1. ***WARNING: ELEMENT TYPE C3D6 USES THE REDUCED INTEGRATION IN Abaqus/Explicit AND WILL BE REFERRED TO AS C3D6R FROM HERE ON
2. ***NOTE: DUE TO EXCESSIVE REPORTING, THE ECHO OF THE *SURFACE OPTION IS BEING
SUPPRESSED.
3.***WARNING: THE PARAMETER HOURGLASS ON THE *SECTION CONTROLS OPTION IS
RELEVANT FOR SOLID, MEMBRANE, AND SHELL ELEMENTS WITH REDUCED
INTEGRATION WHEREVER APPLICABLE. THIS WARNING CAN BE IGNORED IF
THE FEATURE IS APPLIED TO THESE ELEMENT TYPES ONLY.
4.***WARNING: NODE SET DOMAIN HAS NO MEMBERS AND WILL BE IGNORED. NODES DEFINED
IN THIS SET MAY HAVE BEEN DELETED BECAUSE THEY WERE NOT CONNECTED
TO ANY ELEMENTS.
5.***WARNING: THE OPTION *BOUNDARY,TYPE=DISPLACEMENT HAS BEEN USED; CHECK STATUS
FILE BETWEEN STEPS FOR WARNINGS ON ANY JUMPS PRESCRIBED ACROSS THE
STEPS IN DISPLACEMENT VALUES OF TRANSLATIONAL DOF. FOR ROTATIONAL
DOF MAKE SURE THAT THERE ARE NO SUCH JUMPS. ALL JUMPS IN
DISPLACEMENTS ACROSS STEPS ARE IGNORED
I don't really understand how to overcome this warnings. I really appreciate your help then.
Yanie
data analysis of dry fibre simulation
Moderators: Martin, Developers
Re: data analysis of dry fibre simulation
Hi Louise,
I forgot to attach here the geometry of mine after undergone the analysis. However, the simulation has been terminated due to the errors mentioned previously.
Yanie
I forgot to attach here the geometry of mine after undergone the analysis. However, the simulation has been terminated due to the errors mentioned previously.
Yanie
- Attachments
-
- P1-analyzed.png (206.14 KiB) Viewed 22721 times
Re: data analysis of dry fibre simulation
Hi Yanie,
You haven't said which meshing option you have used. If you could give me more detail I might be able to help.
Louise
You haven't said which meshing option you have used. If you could give me more detail I might be able to help.
Louise
Re: data analysis of dry fibre simulation
Hi Louise,
I'm using Dry Fibre mesh for this matter. I also imposed a tension load at the X direction which is X=1.1 , Y=0 and Z=0. I changed the friction coefficient to 0 as well.
Yanie
I'm using Dry Fibre mesh for this matter. I also imposed a tension load at the X direction which is X=1.1 , Y=0 and Z=0. I changed the friction coefficient to 0 as well.
Yanie
Re: data analysis of dry fibre simulation
Hi Louise,
Here are the details of my .dat file.
* This program may not be used for commercial purposes *
* without payment of a commercial fee. *
* *
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
PROCESSING PART, INSTANCE, AND ASSEMBLY INFORMATION
*******************************************************
END PROCESSING PART, INSTANCE, AND ASSEMBLY INFORMATION
***********************************************************
OPTIONS BEING PROCESSED
***************************
*Heading
File generated by TexGen v3.5.1
*Node
*Element, Type=C3D6
***WARNING: ELEMENT TYPE C3D6 USES THE REDUCED INTEGRATION IN Abaqus/Explicit
AND WILL BE REFERRED TO AS C3D6R FROM HERE ON
*Element, Type=C3D8R
*ElSet, ElSet=All, Generate
*ElSet, ElSet=Yarn0
*ElSet, ElSet=Yarn1
*ElSet, ElSet=Yarn2
*ElSet, ElSet=Yarn3
*ElSet, ElSet=Yarn4
*ElSet, ElSet=Yarn5
*ElSet, ElSet=Yarn6
*ElSet, ElSet=Yarn7
*ElSet, ElSet=Yarn8
*ElSet, ElSet=Yarn9
*ElSet, ElSet=Yarn10
*ElSet, ElSet=Yarn11
*ElSet, ElSet=Yarn12
*ElSet, ElSet=Yarn13
*ElSet, ElSet=Yarn14
*ElSet, ElSet=Yarn15
*ElSet, ElSet=Yarn16
*ElSet, ElSet=Yarn17
*ElSet, ElSet=Yarn18
*ElSet, ElSet=Yarn19
*ElSet, ElSet=Yarn20
*ElSet, ElSet=Yarn21
*ElSet, ElSet=Yarn22
*ElSet, ElSet=Yarn23
*NSet, NSet=Bound0A, Unsorted
*NSet, NSet=Bound0B, Unsorted
*Node
*NSet, NSet=Dummy0
*NSet, NSet=Bound1A, Unsorted
*NSet, NSet=Bound1B, Unsorted
*Node
*NSet, NSet=Dummy1
*Node
*NSet, NSet=Domain
*Distribution, Location=Element, Table=TexGenOrientationVectors, Name=TexGenOrientationVectors, Input=MKGUI0.ori
*** INPUT DATA IS READ FROM FILE MKGUI0.ori
*Surface, Name=Yarn0Lower, Type=Element
*Surface, Name=Yarn0Upper, Type=Element
*Surface, Name=Yarn10Lower, Type=Element
*Surface, Name=Yarn10Upper, Type=Element
*Surface, Name=Yarn11Lower, Type=Element
*Surface, Name=Yarn11Upper, Type=Element
*Surface, Name=Yarn12Lower, Type=Element
*Surface, Name=Yarn12Upper, Type=Element
*Surface, Name=Yarn13Lower, Type=Element
*Surface, Name=Yarn13Upper, Type=Element
*Surface, Name=Yarn14Lower, Type=Element
*Surface, Name=Yarn14Upper, Type=Element
*Surface, Name=Yarn15Lower, Type=Element
*Surface, Name=Yarn15Upper, Type=Element
*Surface, Name=Yarn16Lower, Type=Element
*Surface, Name=Yarn16Upper, Type=Element
*Surface, Name=Yarn17Lower, Type=Element
*Surface, Name=Yarn17Upper, Type=Element
*Surface, Name=Yarn18Lower, Type=Element
*Surface, Name=Yarn18Upper, Type=Element
*Surface, Name=Yarn19Lower, Type=Element
*Surface, Name=Yarn19Upper, Type=Element
*Surface, Name=Yarn1Lower, Type=Element
*Surface, Name=Yarn1Upper, Type=Element
*Surface, Name=Yarn20Lower, Type=Element
*Surface, Name=Yarn20Upper, Type=Element
*Surface, Name=Yarn21Lower, Type=Element
*Surface, Name=Yarn21Upper, Type=Element
*Surface, Name=Yarn22Lower, Type=Element
*Surface, Name=Yarn22Upper, Type=Element
*Surface, Name=Yarn23Lower, Type=Element
*Surface, Name=Yarn23Upper, Type=Element
*Surface, Name=Yarn2Lower, Type=Element
*Surface, Name=Yarn2Upper, Type=Element
*Surface, Name=Yarn3Lower, Type=Element
*Surface, Name=Yarn3Upper, Type=Element
*Surface, Name=Yarn4Lower, Type=Element
*Surface, Name=Yarn4Upper, Type=Element
*Surface, Name=Yarn5Lower, Type=Element
*Surface, Name=Yarn5Upper, Type=Element
*Surface, Name=Yarn6Lower, Type=Element
*Surface, Name=Yarn6Upper, Type=Element
*Surface, Name=Yarn7Lower, Type=Element
*Surface, Name=Yarn7Upper, Type=Element
*Surface, Name=Yarn8Lower, Type=Element
*Surface, Name=Yarn8Upper, Type=Element
*Surface, Name=Yarn9Lower, Type=Element
*Surface, Name=Yarn9Upper, Type=Element
*Surface, Name=Yarn0Lower, Type=Element
*Surface, Name=Yarn0Upper, Type=Element
***NOTE: DUE TO EXCESSIVE REPORTING, THE ECHO OF THE *SURFACE OPTION IS BEING
SUPPRESSED.
*Material, Name=Default
*Elastic
*Damping, alpha= 3.75e+6
*Density
*DepVar
*Material, Name=Mat0
*Elastic, type=ENGINEERING CONSTANTS
*Expansion, type=ORTHO
*Damping, alpha= 3.75e+6
*Density
*DepVar
*Surface Interaction, name=YARN
*Friction
*Orientation, Name=TexGenOrientations, Definition=coordinates
*Solid Section, ElSet=Yarn0, Material=Mat0, Orientation=TexGenOrientations, controls=HourglassEnhanced
*Solid Section, ElSet=Yarn1, Material=Mat0, Orientation=TexGenOrientations, controls=HourglassEnhanced
*Solid Section, ElSet=Yarn2, Material=Mat0, Orientation=TexGenOrientations, controls=HourglassEnhanced
*Solid Section, ElSet=Yarn3, Material=Mat0, Orientation=TexGenOrientations, controls=HourglassEnhanced
*Solid Section, ElSet=Yarn4, Material=Mat0, Orientation=TexGenOrientations, controls=HourglassEnhanced
*Solid Section, ElSet=Yarn5, Material=Mat0, Orientation=TexGenOrientations, controls=HourglassEnhanced
*Solid Section, ElSet=Yarn6, Material=Mat0, Orientation=TexGenOrientations, controls=HourglassEnhanced
*Solid Section, ElSet=Yarn7, Material=Mat0, Orientation=TexGenOrientations, controls=HourglassEnhanced
*Solid Section, ElSet=Yarn8, Material=Mat0, Orientation=TexGenOrientations, controls=HourglassEnhanced
*Solid Section, ElSet=Yarn9, Material=Mat0, Orientation=TexGenOrientations, controls=HourglassEnhanced
*Solid Section, ElSet=Yarn10, Material=Mat0, Orientation=TexGenOrientations, controls=HourglassEnhanced
*Solid Section, ElSet=Yarn11, Material=Mat0, Orientation=TexGenOrientations, controls=HourglassEnhanced
*Solid Section, ElSet=Yarn12, Material=Mat0, Orientation=TexGenOrientations, controls=HourglassEnhanced
*Solid Section, ElSet=Yarn13, Material=Mat0, Orientation=TexGenOrientations, controls=HourglassEnhanced
*Solid Section, ElSet=Yarn14, Material=Mat0, Orientation=TexGenOrientations, controls=HourglassEnhanced
*Solid Section, ElSet=Yarn15, Material=Mat0, Orientation=TexGenOrientations, controls=HourglassEnhanced
*Solid Section, ElSet=Yarn16, Material=Mat0, Orientation=TexGenOrientations, controls=HourglassEnhanced
*Solid Section, ElSet=Yarn17, Material=Mat0, Orientation=TexGenOrientations, controls=HourglassEnhanced
*Solid Section, ElSet=Yarn18, Material=Mat0, Orientation=TexGenOrientations, controls=HourglassEnhanced
*Solid Section, ElSet=Yarn19, Material=Mat0, Orientation=TexGenOrientations, controls=HourglassEnhanced
*Solid Section, ElSet=Yarn20, Material=Mat0, Orientation=TexGenOrientations, controls=HourglassEnhanced
*Solid Section, ElSet=Yarn21, Material=Mat0, Orientation=TexGenOrientations, controls=HourglassEnhanced
*Solid Section, ElSet=Yarn22, Material=Mat0, Orientation=TexGenOrientations, controls=HourglassEnhanced
*Solid Section, ElSet=Yarn23, Material=Mat0, Orientation=TexGenOrientations, controls=HourglassEnhanced
*Section Controls, Name=HourglassEnhanced, Hourglass=Enhanced, SECOND ORDER ACCURACY=YES
***WARNING: THE PARAMETER HOURGLASS ON THE *SECTION CONTROLS OPTION IS
RELEVANT FOR SOLID, MEMBRANE, AND SHELL ELEMENTS WITH REDUCED
INTEGRATION WHEREVER APPLICABLE. THIS WARNING CAN BE IGNORED IF
THE FEATURE IS APPLIED TO THESE ELEMENT TYPES ONLY.
*Solid Section, ElSet=Yarn0, Material=Mat0, Orientation=TexGenOrientations, controls=HourglassEnhanced
*Solid Section, ElSet=Yarn1, Material=Mat0, Orientation=TexGenOrientations, controls=HourglassEnhanced
*Solid Section, ElSet=Yarn2, Material=Mat0, Orientation=TexGenOrientations, controls=HourglassEnhanced
*Solid Section, ElSet=Yarn3, Material=Mat0, Orientation=TexGenOrientations, controls=HourglassEnhanced
*Solid Section, ElSet=Yarn4, Material=Mat0, Orientation=TexGenOrientations, controls=HourglassEnhanced
*Solid Section, ElSet=Yarn5, Material=Mat0, Orientation=TexGenOrientations, controls=HourglassEnhanced
*Solid Section, ElSet=Yarn6, Material=Mat0, Orientation=TexGenOrientations, controls=HourglassEnhanced
*Solid Section, ElSet=Yarn7, Material=Mat0, Orientation=TexGenOrientations, controls=HourglassEnhanced
*Solid Section, ElSet=Yarn8, Material=Mat0, Orientation=TexGenOrientations, controls=HourglassEnhanced
*Solid Section, ElSet=Yarn9, Material=Mat0, Orientation=TexGenOrientations, controls=HourglassEnhanced
*Solid Section, ElSet=Yarn10, Material=Mat0, Orientation=TexGenOrientations, controls=HourglassEnhanced
*Solid Section, ElSet=Yarn11, Material=Mat0, Orientation=TexGenOrientations, controls=HourglassEnhanced
*Solid Section, ElSet=Yarn12, Material=Mat0, Orientation=TexGenOrientations, controls=HourglassEnhanced
*Solid Section, ElSet=Yarn13, Material=Mat0, Orientation=TexGenOrientations, controls=HourglassEnhanced
*Solid Section, ElSet=Yarn14, Material=Mat0, Orientation=TexGenOrientations, controls=HourglassEnhanced
*Solid Section, ElSet=Yarn15, Material=Mat0, Orientation=TexGenOrientations, controls=HourglassEnhanced
*Solid Section, ElSet=Yarn16, Material=Mat0, Orientation=TexGenOrientations, controls=HourglassEnhanced
*Solid Section, ElSet=Yarn17, Material=Mat0, Orientation=TexGenOrientations, controls=HourglassEnhanced
*Solid Section, ElSet=Yarn18, Material=Mat0, Orientation=TexGenOrientations, controls=HourglassEnhanced
*Solid Section, ElSet=Yarn19, Material=Mat0, Orientation=TexGenOrientations, controls=HourglassEnhanced
*Solid Section, ElSet=Yarn20, Material=Mat0, Orientation=TexGenOrientations, controls=HourglassEnhanced
*Solid Section, ElSet=Yarn21, Material=Mat0, Orientation=TexGenOrientations, controls=HourglassEnhanced
*Solid Section, ElSet=Yarn22, Material=Mat0, Orientation=TexGenOrientations, controls=HourglassEnhanced
*Solid Section, ElSet=Yarn23, Material=Mat0, Orientation=TexGenOrientations, controls=HourglassEnhanced
*Equation
*Equation
*Equation
*Equation
*Equation
*Equation
*Solid Section, ElSet=Yarn0, Material=Mat0, Orientation=TexGenOrientations, controls=HourglassEnhanced
*Solid Section, ElSet=Yarn1, Material=Mat0, Orientation=TexGenOrientations, controls=HourglassEnhanced
*Solid Section, ElSet=Yarn2, Material=Mat0, Orientation=TexGenOrientations, controls=HourglassEnhanced
*Solid Section, ElSet=Yarn3, Material=Mat0, Orientation=TexGenOrientations, controls=HourglassEnhanced
*Solid Section, ElSet=Yarn4, Material=Mat0, Orientation=TexGenOrientations, controls=HourglassEnhanced
*Solid Section, ElSet=Yarn5, Material=Mat0, Orientation=TexGenOrientations, controls=HourglassEnhanced
*Solid Section, ElSet=Yarn6, Material=Mat0, Orientation=TexGenOrientations, controls=HourglassEnhanced
*Solid Section, ElSet=Yarn7, Material=Mat0, Orientation=TexGenOrientations, controls=HourglassEnhanced
*Solid Section, ElSet=Yarn8, Material=Mat0, Orientation=TexGenOrientations, controls=HourglassEnhanced
*Solid Section, ElSet=Yarn9, Material=Mat0, Orientation=TexGenOrientations, controls=HourglassEnhanced
*Solid Section, ElSet=Yarn10, Material=Mat0, Orientation=TexGenOrientations, controls=HourglassEnhanced
*Solid Section, ElSet=Yarn11, Material=Mat0, Orientation=TexGenOrientations, controls=HourglassEnhanced
*Solid Section, ElSet=Yarn12, Material=Mat0, Orientation=TexGenOrientations, controls=HourglassEnhanced
*Solid Section, ElSet=Yarn13, Material=Mat0, Orientation=TexGenOrientations, controls=HourglassEnhanced
*Solid Section, ElSet=Yarn14, Material=Mat0, Orientation=TexGenOrientations, controls=HourglassEnhanced
*Solid Section, ElSet=Yarn15, Material=Mat0, Orientation=TexGenOrientations, controls=HourglassEnhanced
*Solid Section, ElSet=Yarn16, Material=Mat0, Orientation=TexGenOrientations, controls=HourglassEnhanced
*Solid Section, ElSet=Yarn17, Material=Mat0, Orientation=TexGenOrientations, controls=HourglassEnhanced
*Solid Section, ElSet=Yarn18, Material=Mat0, Orientation=TexGenOrientations, controls=HourglassEnhanced
*Solid Section, ElSet=Yarn19, Material=Mat0, Orientation=TexGenOrientations, controls=HourglassEnhanced
*Solid Section, ElSet=Yarn20, Material=Mat0, Orientation=TexGenOrientations, controls=HourglassEnhanced
*Solid Section, ElSet=Yarn21, Material=Mat0, Orientation=TexGenOrientations, controls=HourglassEnhanced
*Solid Section, ElSet=Yarn22, Material=Mat0, Orientation=TexGenOrientations, controls=HourglassEnhanced
*Solid Section, ElSet=Yarn23, Material=Mat0, Orientation=TexGenOrientations, controls=HourglassEnhanced
*Initial Conditions, Type=Solution, Input=MKGUI0.eld
*Friction
*Initial Conditions, Type=Solution, Input=MKGUI0.eld
*Initial Conditions, Type=Solution, Input=MKGUI0.eld
*Element Output
*Amplitude, name=Amp-1
*Output, History, Variable=PRESELECT
*Output, Field, Variable=PRESELECT
*Step, NLGeom=Yes
***WARNING: NODE SET DOMAIN HAS NO MEMBERS AND WILL BE IGNORED. NODES DEFINED
IN THIS SET MAY HAVE BEEN DELETED BECAUSE THEY WERE NOT CONNECTED
TO ANY ELEMENTS.
*Step, NLGeom=Yes
*Dynamic, Explicit
*Output, History, Variable=PRESELECT
*Output, Field, Variable=PRESELECT
*Element Output
*Boundary
*Boundary, amplitude=Amp-1
*End Step
*Surface Interaction, name=YARN
*Friction
*Surface Behavior, pressure-overclosure=HARD
*Step, NLGeom=Yes
*Dynamic, Explicit
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Output, History, Variable=PRESELECT
*Output, Field, Variable=PRESELECT
*Boundary
*Boundary, amplitude=Amp-1
***WARNING: THE OPTION *BOUNDARY,TYPE=DISPLACEMENT HAS BEEN USED; CHECK STATUS
FILE BETWEEN STEPS FOR WARNINGS ON ANY JUMPS PRESCRIBED ACROSS THE
STEPS IN DISPLACEMENT VALUES OF TRANSLATIONAL DOF. FOR ROTATIONAL
DOF MAKE SURE THAT THERE ARE NO SUCH JUMPS. ALL JUMPS IN
DISPLACEMENTS ACROSS STEPS ARE IGNORED
*End Step
P R O B L E M S I Z E
NUMBER OF ELEMENTS IS 65760
NUMBER OF NODES IS 96050
NUMBER OF NODES DEFINED BY THE USER 96050
TOTAL NUMBER OF VARIABLES IN THE MODEL 288150
(DEGREES OF FREEDOM PLUS MAX NO. OF ANY LAGRANGE MULTIPLIER
VARIABLES. INCLUDE *PRINT,SOLVE=YES TO GET THE ACTUAL NUMBER.)
END OF USER INPUT PROCESSING
JOB TIME SUMMARY
USER TIME (SEC) = 13.210
SYSTEM TIME (SEC) = 0.57000
TOTAL CPU TIME (SEC) = 13.780
WALLCLOCK TIME (SEC) = 14
Yanie
Here are the details of my .dat file.
* This program may not be used for commercial purposes *
* without payment of a commercial fee. *
* *
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
PROCESSING PART, INSTANCE, AND ASSEMBLY INFORMATION
*******************************************************
END PROCESSING PART, INSTANCE, AND ASSEMBLY INFORMATION
***********************************************************
OPTIONS BEING PROCESSED
***************************
*Heading
File generated by TexGen v3.5.1
*Node
*Element, Type=C3D6
***WARNING: ELEMENT TYPE C3D6 USES THE REDUCED INTEGRATION IN Abaqus/Explicit
AND WILL BE REFERRED TO AS C3D6R FROM HERE ON
*Element, Type=C3D8R
*ElSet, ElSet=All, Generate
*ElSet, ElSet=Yarn0
*ElSet, ElSet=Yarn1
*ElSet, ElSet=Yarn2
*ElSet, ElSet=Yarn3
*ElSet, ElSet=Yarn4
*ElSet, ElSet=Yarn5
*ElSet, ElSet=Yarn6
*ElSet, ElSet=Yarn7
*ElSet, ElSet=Yarn8
*ElSet, ElSet=Yarn9
*ElSet, ElSet=Yarn10
*ElSet, ElSet=Yarn11
*ElSet, ElSet=Yarn12
*ElSet, ElSet=Yarn13
*ElSet, ElSet=Yarn14
*ElSet, ElSet=Yarn15
*ElSet, ElSet=Yarn16
*ElSet, ElSet=Yarn17
*ElSet, ElSet=Yarn18
*ElSet, ElSet=Yarn19
*ElSet, ElSet=Yarn20
*ElSet, ElSet=Yarn21
*ElSet, ElSet=Yarn22
*ElSet, ElSet=Yarn23
*NSet, NSet=Bound0A, Unsorted
*NSet, NSet=Bound0B, Unsorted
*Node
*NSet, NSet=Dummy0
*NSet, NSet=Bound1A, Unsorted
*NSet, NSet=Bound1B, Unsorted
*Node
*NSet, NSet=Dummy1
*Node
*NSet, NSet=Domain
*Distribution, Location=Element, Table=TexGenOrientationVectors, Name=TexGenOrientationVectors, Input=MKGUI0.ori
*** INPUT DATA IS READ FROM FILE MKGUI0.ori
*Surface, Name=Yarn0Lower, Type=Element
*Surface, Name=Yarn0Upper, Type=Element
*Surface, Name=Yarn10Lower, Type=Element
*Surface, Name=Yarn10Upper, Type=Element
*Surface, Name=Yarn11Lower, Type=Element
*Surface, Name=Yarn11Upper, Type=Element
*Surface, Name=Yarn12Lower, Type=Element
*Surface, Name=Yarn12Upper, Type=Element
*Surface, Name=Yarn13Lower, Type=Element
*Surface, Name=Yarn13Upper, Type=Element
*Surface, Name=Yarn14Lower, Type=Element
*Surface, Name=Yarn14Upper, Type=Element
*Surface, Name=Yarn15Lower, Type=Element
*Surface, Name=Yarn15Upper, Type=Element
*Surface, Name=Yarn16Lower, Type=Element
*Surface, Name=Yarn16Upper, Type=Element
*Surface, Name=Yarn17Lower, Type=Element
*Surface, Name=Yarn17Upper, Type=Element
*Surface, Name=Yarn18Lower, Type=Element
*Surface, Name=Yarn18Upper, Type=Element
*Surface, Name=Yarn19Lower, Type=Element
*Surface, Name=Yarn19Upper, Type=Element
*Surface, Name=Yarn1Lower, Type=Element
*Surface, Name=Yarn1Upper, Type=Element
*Surface, Name=Yarn20Lower, Type=Element
*Surface, Name=Yarn20Upper, Type=Element
*Surface, Name=Yarn21Lower, Type=Element
*Surface, Name=Yarn21Upper, Type=Element
*Surface, Name=Yarn22Lower, Type=Element
*Surface, Name=Yarn22Upper, Type=Element
*Surface, Name=Yarn23Lower, Type=Element
*Surface, Name=Yarn23Upper, Type=Element
*Surface, Name=Yarn2Lower, Type=Element
*Surface, Name=Yarn2Upper, Type=Element
*Surface, Name=Yarn3Lower, Type=Element
*Surface, Name=Yarn3Upper, Type=Element
*Surface, Name=Yarn4Lower, Type=Element
*Surface, Name=Yarn4Upper, Type=Element
*Surface, Name=Yarn5Lower, Type=Element
*Surface, Name=Yarn5Upper, Type=Element
*Surface, Name=Yarn6Lower, Type=Element
*Surface, Name=Yarn6Upper, Type=Element
*Surface, Name=Yarn7Lower, Type=Element
*Surface, Name=Yarn7Upper, Type=Element
*Surface, Name=Yarn8Lower, Type=Element
*Surface, Name=Yarn8Upper, Type=Element
*Surface, Name=Yarn9Lower, Type=Element
*Surface, Name=Yarn9Upper, Type=Element
*Surface, Name=Yarn0Lower, Type=Element
*Surface, Name=Yarn0Upper, Type=Element
***NOTE: DUE TO EXCESSIVE REPORTING, THE ECHO OF THE *SURFACE OPTION IS BEING
SUPPRESSED.
*Material, Name=Default
*Elastic
*Damping, alpha= 3.75e+6
*Density
*DepVar
*Material, Name=Mat0
*Elastic, type=ENGINEERING CONSTANTS
*Expansion, type=ORTHO
*Damping, alpha= 3.75e+6
*Density
*DepVar
*Surface Interaction, name=YARN
*Friction
*Orientation, Name=TexGenOrientations, Definition=coordinates
*Solid Section, ElSet=Yarn0, Material=Mat0, Orientation=TexGenOrientations, controls=HourglassEnhanced
*Solid Section, ElSet=Yarn1, Material=Mat0, Orientation=TexGenOrientations, controls=HourglassEnhanced
*Solid Section, ElSet=Yarn2, Material=Mat0, Orientation=TexGenOrientations, controls=HourglassEnhanced
*Solid Section, ElSet=Yarn3, Material=Mat0, Orientation=TexGenOrientations, controls=HourglassEnhanced
*Solid Section, ElSet=Yarn4, Material=Mat0, Orientation=TexGenOrientations, controls=HourglassEnhanced
*Solid Section, ElSet=Yarn5, Material=Mat0, Orientation=TexGenOrientations, controls=HourglassEnhanced
*Solid Section, ElSet=Yarn6, Material=Mat0, Orientation=TexGenOrientations, controls=HourglassEnhanced
*Solid Section, ElSet=Yarn7, Material=Mat0, Orientation=TexGenOrientations, controls=HourglassEnhanced
*Solid Section, ElSet=Yarn8, Material=Mat0, Orientation=TexGenOrientations, controls=HourglassEnhanced
*Solid Section, ElSet=Yarn9, Material=Mat0, Orientation=TexGenOrientations, controls=HourglassEnhanced
*Solid Section, ElSet=Yarn10, Material=Mat0, Orientation=TexGenOrientations, controls=HourglassEnhanced
*Solid Section, ElSet=Yarn11, Material=Mat0, Orientation=TexGenOrientations, controls=HourglassEnhanced
*Solid Section, ElSet=Yarn12, Material=Mat0, Orientation=TexGenOrientations, controls=HourglassEnhanced
*Solid Section, ElSet=Yarn13, Material=Mat0, Orientation=TexGenOrientations, controls=HourglassEnhanced
*Solid Section, ElSet=Yarn14, Material=Mat0, Orientation=TexGenOrientations, controls=HourglassEnhanced
*Solid Section, ElSet=Yarn15, Material=Mat0, Orientation=TexGenOrientations, controls=HourglassEnhanced
*Solid Section, ElSet=Yarn16, Material=Mat0, Orientation=TexGenOrientations, controls=HourglassEnhanced
*Solid Section, ElSet=Yarn17, Material=Mat0, Orientation=TexGenOrientations, controls=HourglassEnhanced
*Solid Section, ElSet=Yarn18, Material=Mat0, Orientation=TexGenOrientations, controls=HourglassEnhanced
*Solid Section, ElSet=Yarn19, Material=Mat0, Orientation=TexGenOrientations, controls=HourglassEnhanced
*Solid Section, ElSet=Yarn20, Material=Mat0, Orientation=TexGenOrientations, controls=HourglassEnhanced
*Solid Section, ElSet=Yarn21, Material=Mat0, Orientation=TexGenOrientations, controls=HourglassEnhanced
*Solid Section, ElSet=Yarn22, Material=Mat0, Orientation=TexGenOrientations, controls=HourglassEnhanced
*Solid Section, ElSet=Yarn23, Material=Mat0, Orientation=TexGenOrientations, controls=HourglassEnhanced
*Section Controls, Name=HourglassEnhanced, Hourglass=Enhanced, SECOND ORDER ACCURACY=YES
***WARNING: THE PARAMETER HOURGLASS ON THE *SECTION CONTROLS OPTION IS
RELEVANT FOR SOLID, MEMBRANE, AND SHELL ELEMENTS WITH REDUCED
INTEGRATION WHEREVER APPLICABLE. THIS WARNING CAN BE IGNORED IF
THE FEATURE IS APPLIED TO THESE ELEMENT TYPES ONLY.
*Solid Section, ElSet=Yarn0, Material=Mat0, Orientation=TexGenOrientations, controls=HourglassEnhanced
*Solid Section, ElSet=Yarn1, Material=Mat0, Orientation=TexGenOrientations, controls=HourglassEnhanced
*Solid Section, ElSet=Yarn2, Material=Mat0, Orientation=TexGenOrientations, controls=HourglassEnhanced
*Solid Section, ElSet=Yarn3, Material=Mat0, Orientation=TexGenOrientations, controls=HourglassEnhanced
*Solid Section, ElSet=Yarn4, Material=Mat0, Orientation=TexGenOrientations, controls=HourglassEnhanced
*Solid Section, ElSet=Yarn5, Material=Mat0, Orientation=TexGenOrientations, controls=HourglassEnhanced
*Solid Section, ElSet=Yarn6, Material=Mat0, Orientation=TexGenOrientations, controls=HourglassEnhanced
*Solid Section, ElSet=Yarn7, Material=Mat0, Orientation=TexGenOrientations, controls=HourglassEnhanced
*Solid Section, ElSet=Yarn8, Material=Mat0, Orientation=TexGenOrientations, controls=HourglassEnhanced
*Solid Section, ElSet=Yarn9, Material=Mat0, Orientation=TexGenOrientations, controls=HourglassEnhanced
*Solid Section, ElSet=Yarn10, Material=Mat0, Orientation=TexGenOrientations, controls=HourglassEnhanced
*Solid Section, ElSet=Yarn11, Material=Mat0, Orientation=TexGenOrientations, controls=HourglassEnhanced
*Solid Section, ElSet=Yarn12, Material=Mat0, Orientation=TexGenOrientations, controls=HourglassEnhanced
*Solid Section, ElSet=Yarn13, Material=Mat0, Orientation=TexGenOrientations, controls=HourglassEnhanced
*Solid Section, ElSet=Yarn14, Material=Mat0, Orientation=TexGenOrientations, controls=HourglassEnhanced
*Solid Section, ElSet=Yarn15, Material=Mat0, Orientation=TexGenOrientations, controls=HourglassEnhanced
*Solid Section, ElSet=Yarn16, Material=Mat0, Orientation=TexGenOrientations, controls=HourglassEnhanced
*Solid Section, ElSet=Yarn17, Material=Mat0, Orientation=TexGenOrientations, controls=HourglassEnhanced
*Solid Section, ElSet=Yarn18, Material=Mat0, Orientation=TexGenOrientations, controls=HourglassEnhanced
*Solid Section, ElSet=Yarn19, Material=Mat0, Orientation=TexGenOrientations, controls=HourglassEnhanced
*Solid Section, ElSet=Yarn20, Material=Mat0, Orientation=TexGenOrientations, controls=HourglassEnhanced
*Solid Section, ElSet=Yarn21, Material=Mat0, Orientation=TexGenOrientations, controls=HourglassEnhanced
*Solid Section, ElSet=Yarn22, Material=Mat0, Orientation=TexGenOrientations, controls=HourglassEnhanced
*Solid Section, ElSet=Yarn23, Material=Mat0, Orientation=TexGenOrientations, controls=HourglassEnhanced
*Equation
*Equation
*Equation
*Equation
*Equation
*Equation
*Solid Section, ElSet=Yarn0, Material=Mat0, Orientation=TexGenOrientations, controls=HourglassEnhanced
*Solid Section, ElSet=Yarn1, Material=Mat0, Orientation=TexGenOrientations, controls=HourglassEnhanced
*Solid Section, ElSet=Yarn2, Material=Mat0, Orientation=TexGenOrientations, controls=HourglassEnhanced
*Solid Section, ElSet=Yarn3, Material=Mat0, Orientation=TexGenOrientations, controls=HourglassEnhanced
*Solid Section, ElSet=Yarn4, Material=Mat0, Orientation=TexGenOrientations, controls=HourglassEnhanced
*Solid Section, ElSet=Yarn5, Material=Mat0, Orientation=TexGenOrientations, controls=HourglassEnhanced
*Solid Section, ElSet=Yarn6, Material=Mat0, Orientation=TexGenOrientations, controls=HourglassEnhanced
*Solid Section, ElSet=Yarn7, Material=Mat0, Orientation=TexGenOrientations, controls=HourglassEnhanced
*Solid Section, ElSet=Yarn8, Material=Mat0, Orientation=TexGenOrientations, controls=HourglassEnhanced
*Solid Section, ElSet=Yarn9, Material=Mat0, Orientation=TexGenOrientations, controls=HourglassEnhanced
*Solid Section, ElSet=Yarn10, Material=Mat0, Orientation=TexGenOrientations, controls=HourglassEnhanced
*Solid Section, ElSet=Yarn11, Material=Mat0, Orientation=TexGenOrientations, controls=HourglassEnhanced
*Solid Section, ElSet=Yarn12, Material=Mat0, Orientation=TexGenOrientations, controls=HourglassEnhanced
*Solid Section, ElSet=Yarn13, Material=Mat0, Orientation=TexGenOrientations, controls=HourglassEnhanced
*Solid Section, ElSet=Yarn14, Material=Mat0, Orientation=TexGenOrientations, controls=HourglassEnhanced
*Solid Section, ElSet=Yarn15, Material=Mat0, Orientation=TexGenOrientations, controls=HourglassEnhanced
*Solid Section, ElSet=Yarn16, Material=Mat0, Orientation=TexGenOrientations, controls=HourglassEnhanced
*Solid Section, ElSet=Yarn17, Material=Mat0, Orientation=TexGenOrientations, controls=HourglassEnhanced
*Solid Section, ElSet=Yarn18, Material=Mat0, Orientation=TexGenOrientations, controls=HourglassEnhanced
*Solid Section, ElSet=Yarn19, Material=Mat0, Orientation=TexGenOrientations, controls=HourglassEnhanced
*Solid Section, ElSet=Yarn20, Material=Mat0, Orientation=TexGenOrientations, controls=HourglassEnhanced
*Solid Section, ElSet=Yarn21, Material=Mat0, Orientation=TexGenOrientations, controls=HourglassEnhanced
*Solid Section, ElSet=Yarn22, Material=Mat0, Orientation=TexGenOrientations, controls=HourglassEnhanced
*Solid Section, ElSet=Yarn23, Material=Mat0, Orientation=TexGenOrientations, controls=HourglassEnhanced
*Initial Conditions, Type=Solution, Input=MKGUI0.eld
*Friction
*Initial Conditions, Type=Solution, Input=MKGUI0.eld
*Initial Conditions, Type=Solution, Input=MKGUI0.eld
*Element Output
*Amplitude, name=Amp-1
*Output, History, Variable=PRESELECT
*Output, Field, Variable=PRESELECT
*Step, NLGeom=Yes
***WARNING: NODE SET DOMAIN HAS NO MEMBERS AND WILL BE IGNORED. NODES DEFINED
IN THIS SET MAY HAVE BEEN DELETED BECAUSE THEY WERE NOT CONNECTED
TO ANY ELEMENTS.
*Step, NLGeom=Yes
*Dynamic, Explicit
*Output, History, Variable=PRESELECT
*Output, Field, Variable=PRESELECT
*Element Output
*Boundary
*Boundary, amplitude=Amp-1
*End Step
*Surface Interaction, name=YARN
*Friction
*Surface Behavior, pressure-overclosure=HARD
*Step, NLGeom=Yes
*Dynamic, Explicit
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Contact Pair, Interaction=Yarn
*Output, History, Variable=PRESELECT
*Output, Field, Variable=PRESELECT
*Boundary
*Boundary, amplitude=Amp-1
***WARNING: THE OPTION *BOUNDARY,TYPE=DISPLACEMENT HAS BEEN USED; CHECK STATUS
FILE BETWEEN STEPS FOR WARNINGS ON ANY JUMPS PRESCRIBED ACROSS THE
STEPS IN DISPLACEMENT VALUES OF TRANSLATIONAL DOF. FOR ROTATIONAL
DOF MAKE SURE THAT THERE ARE NO SUCH JUMPS. ALL JUMPS IN
DISPLACEMENTS ACROSS STEPS ARE IGNORED
*End Step
P R O B L E M S I Z E
NUMBER OF ELEMENTS IS 65760
NUMBER OF NODES IS 96050
NUMBER OF NODES DEFINED BY THE USER 96050
TOTAL NUMBER OF VARIABLES IN THE MODEL 288150
(DEGREES OF FREEDOM PLUS MAX NO. OF ANY LAGRANGE MULTIPLIER
VARIABLES. INCLUDE *PRINT,SOLVE=YES TO GET THE ACTUAL NUMBER.)
END OF USER INPUT PROCESSING
JOB TIME SUMMARY
USER TIME (SEC) = 13.210
SYSTEM TIME (SEC) = 0.57000
TOTAL CPU TIME (SEC) = 13.780
WALLCLOCK TIME (SEC) = 14
Yanie
Re: data analysis of dry fibre simulation
Hi Yanie,
I think you need to find someone who is knowledgeable about Abaqus to help you with this. Looking at the image it looks like you haven't specified that the ends of your yarns should match - are your boundary conditions correct? Probably the Abaqus user manual can help you with interpreting the warnings.
Louise
I think you need to find someone who is knowledgeable about Abaqus to help you with this. Looking at the image it looks like you haven't specified that the ends of your yarns should match - are your boundary conditions correct? Probably the Abaqus user manual can help you with interpreting the warnings.
Louise
Re: data analysis of dry fibre simulation
HI Louise,
Just wanna clarify with you on the computational of the outputs from dry fibre analysis. Is it like the normal calculation of ABAQUS implemented in determining the elastic properties?
Yanie
Just wanna clarify with you on the computational of the outputs from dry fibre analysis. Is it like the normal calculation of ABAQUS implemented in determining the elastic properties?
Yanie
Re: data analysis of dry fibre simulation
Hi Yanie,
I'm not sure what you mean by "normal calculation of ABAQUS implemented in determining the elastic properties"?
Best regards,
Louise
I'm not sure what you mean by "normal calculation of ABAQUS implemented in determining the elastic properties"?
Best regards,
Louise
Re: data analysis of dry fibre simulation
Hi Louise,
Sorry if I make you confused. What I'm trying to say is after I obtain the odb file for dry fibre simulation, how could I calculate the E, v etc from there? Is it by plotting the stress-strain curve straightaway?
Yanie
Sorry if I make you confused. What I'm trying to say is after I obtain the odb file for dry fibre simulation, how could I calculate the E, v etc from there? Is it by plotting the stress-strain curve straightaway?
Yanie
Re: data analysis of dry fibre simulation
Hi Yanie,
Yes, you will need to use your stress-strain curve to calculate the properties. You will need to be careful as they may be non-linear.
Louise
Yes, you will need to use your stress-strain curve to calculate the properties. You will need to be careful as they may be non-linear.
Louise
Re: data analysis of dry fibre simulation
Hi Louise,
Ok, I'm aware of stress-strain curve. But since we are dealing with PBC, how could we determine the average E or the total RVE? If I'm not mistaken, if we have PBC, we could retrieve all the information via Reaction force right? But I'm still not really sure how far this thing could be implemented.
Hope you may guide me then.
Yanie
Ok, I'm aware of stress-strain curve. But since we are dealing with PBC, how could we determine the average E or the total RVE? If I'm not mistaken, if we have PBC, we could retrieve all the information via Reaction force right? But I'm still not really sure how far this thing could be implemented.
Hope you may guide me then.
Yanie
Re: data analysis of dry fibre simulation
Hi Yanie,
I've just talked with my colleague who knows more about this than I do. In the dry fibre simulation the reaction force is given on the dummy node used in the PBC equations. You will have a displacement history so you should be able to examine the unit cell response by looking at the force/displacement relationship on the dummy nodes.
I'm afraid that I haven't used this myself so can't be much more help. Hopefully you will have someone at your university who knows more about analysing the results of simulations than I do!
Best regards,
Louise
I've just talked with my colleague who knows more about this than I do. In the dry fibre simulation the reaction force is given on the dummy node used in the PBC equations. You will have a displacement history so you should be able to examine the unit cell response by looking at the force/displacement relationship on the dummy nodes.
I'm afraid that I haven't used this myself so can't be much more help. Hopefully you will have someone at your university who knows more about analysing the results of simulations than I do!
Best regards,
Louise
Re: data analysis of dry fibre simulation
Hi Louise,
Ok, thanks a lot. At least I have the idea on how to analyse them. Thanks for the help again.
Yanie
Ok, thanks a lot. At least I have the idea on how to analyse them. Thanks for the help again.
Yanie
Re: data analysis of dry fibre simulation
Hi Louise,
I'm trying to plot the stress-strain graph for my output. Let say, I would like to calculate E11 so I picked the integration point for the output variables position, S11 and LE11. However, I'm having a problem in picking the element/nodes. To which should I pick?I have 24 yarns in my geometry. I tried to pick ALL but the system went error then.
Thanks in advance.
Yanie
I'm trying to plot the stress-strain graph for my output. Let say, I would like to calculate E11 so I picked the integration point for the output variables position, S11 and LE11. However, I'm having a problem in picking the element/nodes. To which should I pick?I have 24 yarns in my geometry. I tried to pick ALL but the system went error then.
Thanks in advance.
Yanie
Re: data analysis of dry fibre simulation
Hi Yanie,
I'm afraid, as I've said before, that I'm not an Abaqus expert and can't really guide you on this. You'll need to find someone who is skilled at interpreting Abaqus output to help.
Sorry not to be more help,
Louise
I'm afraid, as I've said before, that I'm not an Abaqus expert and can't really guide you on this. You'll need to find someone who is skilled at interpreting Abaqus output to help.
Sorry not to be more help,
Louise