Data analysis-elastic properties computational

[louisepb]

Hi Yanie,

As far as I'm aware the results from dataHandling.py should be correct. Can you compare the results from the script with those that you get if you do the calculations by hand? Where are the discrepancies?

Louise

[dyeyanie]

Hi Louise,

I'm trying to get the material properties for a sheared weave. However, I received a message which saying 'IndexError: Sequence index out of range.' I also attached herewith the screenshot.

Tq in advance.

-yanie-

[louisepb]

Hi Yanie,

Sorry for the delayed reply, I've been on holiday.

There is sometimes a problem with the thermomechanical step which I haven't managed to resolve as yet. You could try taking this out and see if your script runs then. If not get back to me with more details and I'll see what I can do.

Hope that helps,
Louise

[duc hai]

help me, use Abaqus for woven composite. I export from texGen
thanks

[duc hai]

help me, use Abaqus for woven composite. I export from texGen
thanks

[duc hai]

hi,
I using texGen make model and then I use Abaqus for calculate data analysis-elastic properties. By my method not well. Can you help me?
thanks

[louisepb]

Hello,

Please could you give some detail about exactly what you are trying to do? You need to be specific about your problem in order for someone to be able to help.

Best regards,
Louise

[duc hai]

hi louisepb,
thanks for your helful, I have done again and try again, try again but have error. Plesase can you send for me your email, I send to you my model. You help me repair it.
thanks

[louisepb]

Hi,

If you look at the error message you will see that the error is in the effectiveMatPropRVE.py Python script. Have you looked at this file. The error indicates that it is using a variable 'ContinuumModel' which has not been defined. This should have been done earlier in the script. If you define this with an appropriate value for the case that you are using then the script should run.

However, which version of TexGen and these scripts are you using as the most recent ones do not use the ContinuumModel variable. It might be worth checking that you are using the correct script.

Hope that helps,
Louise

[duc hai]

thank Louisepb,
Could you check for me the error? I check again, again and again but now still have got mistake.
can you send to me email, my email is: shipbuilding_dta10@yahoo.com
thanks for your help

[louisepb]

Hi,
You should be able to upload the script here. If you can do that then I can take a look at it.

I'm assuming that your TexGen job runs in Abaqus and that you've got a valid odb file which the scripts can interrogate?

Best regards,
Louise

[duc hai]

hi,
I want Li's paper, could you send for me?

[louisepb]

Hi,

The link to the paper is here: http://texgen.sourceforge.net/index.php ... and_Abaqus

Best regards,
Louise

[duc hai]

hi,
I fell many person ask, but I can't done. I don't know why don't send email. my data very big, can't upload in here.
I wan't you help, and many person want. very difficult for do with this webside

[duc hai]

hi,
x=0,y=1,z=2,xy=3,yz=4,xz=5 where put it? put it in place? I don't know.
How much is the load?
thanks