There is one picture which i am really want to know how to create this model when i read the paper 'Modelling the geometry of textile reinforcements for composites: TexGen'.
textile.JPG (35.23 KiB) Viewed 13428 times
Could you please give me some support how can i create this model by GUI?
Unfortunately, i cannot implement it. From the Weave panel, there is just one layer of weft and warp yarn. Cannot be two layers in the User Guide. And i also checked the 3D Weave panel, didn't work.
If you create a 3D weave from the weave wizard then you need to add layers in the pattern dialog. If you right click on the boxes at the side of the yarn you will get the drop down menu and then you can choose the Add Layer option. If you click on the appropriate blue yarn it will give a dotted line and this is the cross-section that is shown at the bottom of the window. When you initially add a warp yarn it won't be apparent because it is displayed at the same location as the original yarn. If you click and drag it in the cross-section view at the bottom you will be able to move it. It should look something like the image below.