Hello,
I am having problems exporting the TexGen Model as ABAQUS Dry-Fibre,
when I export the model and Import it to ANSA a seperate property called TexGen Orientations is created.
I tried adjusting the model in different ways, but I can't avoid the TexGen Orientations from beeing created.
I added a picture with the highlighted TexGen Orientations property.
Thanks in advance and best regards,
Kevin
Problems exporting as ABAQUS dry-fibre to ANSA
Moderators: Martin, Developers
-
TexGenUser131579
- Posts: 2
- Joined: Sat Jul 30, 2022 1:26 pm
Problems exporting as ABAQUS dry-fibre to ANSA
- Attachments
-
- TGOrientations2.jpg (253.37 KiB) Viewed 39561 times
-
- TGOrientations.jpg (183.86 KiB) Viewed 39561 times
Re: Problems exporting as ABAQUS dry-fibre to ANSA
Hi Kevin,
I'm afraid that I don't know anything about ANSA and don't have access to it. You will probably need to read through their documentation to find out how they import Abaqus .inp files and to see how they create the orientations. The parts highlighted in the image don't seem to bear any relation to the .ori file information exported by TexGen (which gives orientations for every element).
Sorry I can't be more help. You probably need to contact ANSA technical support to find out what's going on.
Best wishes,
Louise
I'm afraid that I don't know anything about ANSA and don't have access to it. You will probably need to read through their documentation to find out how they import Abaqus .inp files and to see how they create the orientations. The parts highlighted in the image don't seem to bear any relation to the .ori file information exported by TexGen (which gives orientations for every element).
Sorry I can't be more help. You probably need to contact ANSA technical support to find out what's going on.
Best wishes,
Louise